SEARCH  Specials  Products  TMS  Availability  Shipping  Payment  Returns  Buying Online  Quotes  Your List Contact Us
FREE SHIPPING for any order that exceeds $50!!!
 

AlcoScreen 02

Alco-Screen 02 has been tested and approved by the US Department of Transportation (DOT) for required testing of all transportation and safety employees for blood alcohol concentrations above the federally mandated ZERO TOLERANCE LEVEL of 0.02%

Product Home Page Features & Benefits Symptoms & Conditions Product Instructions Product Information
Add To Shopping List

Molding and Curing

The critical aspect of Capitol Vial’s injection molding technology is its ability to close the container before the material is fully set.  By closing the container while the part is still hot, Capitol Vial, Inc. uses the natural curing properties of the plastic to help form the seals inherent in the container design. The process for closing the container in the mold is shown in the figures below.
The mold consists of two sides, the cavity and the core. The container can be closed in the mold because the cavity that forms the lid is located in a movable piece of the mold called the flipper. Plastic is injected into the mold from the bottom of the body cavity and forms around the cores. The hinge of the container provides the pathway for the plastic to flow from the body to the lid cavity.  As depicted in Step 1, the container remains in the cavity after the cores have retracted.  This differs from many injection molding processes where the part is usually removed from the cavity by the retracting core.

Step 1
With the core side retracted, the flipper is free to rotate upwards. Step 2 illustrates the flipper moving the lid towards the body of the container.  The flipper rotates 180º until the lid is closed onto the body of the container. Since the container is still hot, the plastic flexes and allows the seal to form without distortion.

Step 2
As the flipper returns to its home position in Step 3, the lid is secured to the body of the container and the normal shrinkage process continues. Along with the airtight seals, shrinkage also creates the “living hinge” of the container.  The hinge is molded in the open position and as a result acquires memory for this orientation.  The hinge also obtains memory in the closed position.  This “dual memory” creates a robust “living hinge” which maintains its integrity indefinitely.

Step 3
Once the flipper is fully retracted, the container is ejected from the mold in Step # 4 with the use of a mechanical pin and air pressure. The container continues to cool until it reaches ambient temperature.

Step 4
Figure #5 shows the distortion that occurs when the lid is closed after the material has cooled and has fully set.  Since shrinkage has occurred, the plastic is less flexible and the first and third seal areas are distorted upon closure.  This distortion damages the integrity of the seals and prevents the container from being airtight or leak-proof.  Capitol Vial's unique closing processes prevent the plastic from cooling excessively before closure and ensure a perfect seal.


Product Home Page Features & Benefits Symptoms & Conditions
Product Instructions Product Information Add To Shopping List

SERVICES FOR >> Large purchasers  Employers  Parents  Education  Non-Profit  Government